Solmeta Pro2-EOS, Руководство пользователя

Страница: 11 / 28

Recording GPS data (geotagging)
R
7
1.Connect the receiver to a compatible Camera
1. Turn
the camera. off
2. The receiver is equipped with a mount that fits the camera accessory shoe. Slide the receiver onto the
camera accessory shoe. Then connect it to your camera’s accessory port via the connecting cable.
Turn on the Pro2-EOS receiver and the camera. If the receiver is properly connected to the camera, GPS signal
status is also shown on the camera LCD panel or LCD monitor. The GPS icon is only displayed when the
receiver is communication with the camera.
Blinking GPS: Signal not acquired
Constant GPS: Signal acquired
2. Acquire GPS signals
To acquire GPS signals, take the receiver and camera outdoors where the sky is unobstructed and hold it up.
At first, you will see a flashing GPS symbol in the top left of the receiver’s LCD, indicating that the receiver is
searching for satellite signals. After a few moments, the GPS symbol will be steady, indicating acquired GPS
signals.
Pro2-EOS
Canon EOS 650D main screen