CSC-H64 User Manual Ver. 1.0
- 51 -
http://www.ezTCP.com
5.4
UDP
UDP has no connection processes. In this mode, data is sent in block units. Therefore,
data that comes through CSC-H64’s serial ports is collected in block units to send it
elsewhere.
5.4.1
Key parameters
Block Size
[Block Size] is to set the time to gather data in one block. Its unit is byte. If the data
in configured size of the [Block Size] comes into the serial port, CSC-H64 will send
them as one block to the network. The maximum value could be 1460 bytes.
Dynamic update of Peer host
If you set the value of [Peer Address] and [Peer Port] to 0, [dynamic update of peer
host] function is activated. By using this function, CSC-H64 can communicate with
multiple hosts without additional setting.
