CIE-M10A User Manual Ver. 1.0
- 18 -
2.2
Test operation
2.2.1 Modbus/TCP Test
This is for checking the operation of Input and output ports of CIE-M10A via
Modbus/TCP. In this instruction, Modbus/TCP test program was used.
Run ezManager. Then, you can see the window as shown below.
Figure 2-3 Modbus/TCP test program of the ezManager
①
Search the connected CIE-M10A with [Search All] button.
②
Select a MAC address of searched product on the [search result].
③
Check the [Tools] option.
④
Press the [Modbus/TCP] button.
⑤
The test program will appear on the right side of the ezManager
In the case of using previous versions of firmware 3.1F the test program is shown
automatically when you succeed in searching the product.
