CIE-H12 User Manual Ver. 1.9
- 42 -
http://www.ezTCP.com
7.3.2 Valid Time
CIE-H12 only recognizes signals of the input ports as the valid signals when the signal
lasts for the [Valid Time]. If the signals are not maintained for the [Valid Time], the input
signals will be ignored. The unit used for the [Valid Time] is 1ms. However, because the
accuracy is only guaranteed in 10ms, the designated values are rounded down in units of
10ms.
7.3.3
Delay
Output values are reflected to CIE-H12’s output ports later than the time set to [Delay].
For example, if [Delay] is set to ‘0’, the output values are reflected to the output ports
immediately. Although it is allowed to set the values in 1ms, it is accurate to 10ms, rounded
down.)
If the timer for the [Delay] is already running, all the subsequent orders for giving
signals to the output ports are ignored.
