CIE-H12 User Manual Ver. 1.9
- 39 -
http://www.ezTCP.com
7.2.2 Sending MAC Address
[Sending MAC Address] is a function that CIE-H12 sends its MAC address to the remote
host right after the connection is established. By using this function, a server can identify
multiple devices with the information.
Figure 7-1 setting of Sending MAC Address function
① Move to the [Option] tab.
② Check the [Send MAC Address] option.
7.2.3 Debugging Message
By using [Debugging] option, users can receive debugging messages from CIE-H12 on
the network.
When you are facing a problem about the TCP connection or data communication, use
this function and send us the stored file. We can use it for finding out the reason of
your problem.
Debugging messages are broadcasted to entire network via UDP so it might cause
serious network traffic. Remember you should turn the option off after using it.
Setting debugging option
Figure 7-2 setting debugging option
① Check the [Debugging Message] option
② Press the [Write] button
③ After checking the [Advanced Menu], click the [Debugging Message] button. And
then, the debugging message window appears on your screen as shown below.
