GB
GB
s
AFTER USE
●
If you want to switch the appliance off, always press the
ON/OFF
button first
before disconnecting the power cord from the power socket.
●
If you do not want to use the appliance for more than 2 days, we recommend
pouring the water out of the water tub and the water tank and drying the water
tank with a dry towel as well as leaving the humidification mat out to air dry in
the opened appliance.
●
In general, we recommend pouring the water remaining in the water tub
and the water tank away before filling new water.
s
DAILY / WEEKLY CARE OF YOUR
AIR HUMIDIFIER
1. Change the water in the water tub and the water tank every day. Only use fresh
tap water without any additives.
2. Clean the humidification mat, the water tank and the water tub every week.
3. Should you not use the air humidifier for more than 2 days, we recommend
pouring the water out of the water tub and the water tank and leaving the
appliance open.
4. Should you not want to use your appliance for prolonged periods of time, please
clean and dry all parts carefully and store the air humidifier in the original pack-
aging in a dry room.
107
106
s
STARTING UP
If the water tank is filled with fresh tap water and the appliance is correctly assem-
bled (water tub with humidification mat is inserted, water tank is installed) and
connected to the power, you can start using it.
Tip:
We recommend waiting for a short while after the water has run into the
water tub to let the humidification mat soak through. This drastically improves the
immediate effects of humidification.
1. SWITCHING THE APPLIANCE ON
●
Press the
ON/OFF
button to switch the appliance on. The current room air
humidity lights up in the display as well as the High Speed function light,
indicating the highest ventilation speed.
Note:
The humidity switch built into
the appliance measures the air humidity right next to the appliance. Another
humidity switch placed outside of the appliance might report a different value
for air humidity.
2. CHOOSING THE FUNCTIONS
●
Choose the desired functions. Set the ventilation speed with the
Mode
but-
ton and the desired air humidity with the
Humidity
button (The latter is not
required in the “Intelli. Speed” function). If desired, activate the
Timer
function
(Automatic shutdown when the appliance is switched on). Additionally, the child
safety device can be activated (press and hold the
ON/OFF
button for at least
three seconds). The ion function can be switched on or off (press and hold the
Mode
button for at least three seconds) or the function lights and the display
can be switched off (press
Screen Off
button).
●
In general, it can be said:
The higher the room temperature, the quicker the
humidification.
●
The appliance switches off automatically when the water tub is not sufficiently
filled with water any longer. The
Water Empty
light switches on and the appli-
ance switches off (see section “Water Empty Display” on page 104).
●
Before refilling the appliance with water, please always switch the appliance off
with the
ON/OFF
button first. Then, lift the water tank up and away. You can
now fill the water tank with fresh tap water.
