SOLIS Grind & Infuse Pro 115A, Руководство пользователя

Страница: 150 / 188

150
E
ESPRESSO MAKING: STEP BY STEP
A great coffee is a balance of main flavour ele-
ments: Acidity, aroma, bitterness, body, nuttiness,
and sharpness. The single wall filters for this
espresso machine give you the opportunity to
experiment with adjusting grind, grind amount
and tamp to extract a rich variety of flavours.
GRIND + AMOUNT + TAMP = FLOW
Over Extracted
More than
Bitter Too fine Too much Too heavy
40 sec.
Astringent
Balanced Optimal 8–10 g 1 cup 15–20 kg 25–35 sec.
15 –18 g 2 cups
Under extracted Less than
Weak
/
Watery Too coarse Too little Too light 20 sec.
STEP 1 – FILLING THE WATER TANK
• Fill the water tank with cold, tap water to the
maximum mark on the side of the tank and
slide the water tank carefully back into position
at the back of the machine.
• Plug the power cord into a 230/240 V power
outlet.
• Press the POWER button to «ON», the POWER
button surround will flash while the machine
is heating. When the correct temperature has
been reached, all the button surrounds on the
control panel will illuminate.
STEP 2 – PRE-WARMING THE CUPS
This will help maintain the coffee’s optimal
temperature when brewed into the cups.
• The cup warming plate will start to warm as
the machine heats.
• Use the hot water function to fill the cups with
hot water, wait for a while, empty out the
water and dry the cups.
• Place the cups on the warming tray.
NOTE:
Check the water level before use and replace
the water daily. The water tank should be
refilled with fresh, cold tap water before each
use. Do not use mineral or distilled water or
any other liquid.
NOTE:
In order to brew the coffee at the ideal
temperature we recommend running a
complete cycle without ground coffee. This
will ensure that all the main internal com-
ponents are optimally preheated.