Soliom S100, Руководство пользователя

Страница: 14 / 31

In-App Setup
4
)
Congratulations! You have connected your camera to the
App successfully, now you can live view the camera on your
phone anytime and anywhere.
If you're unable to pair the camera,Please check below
suggestions:
Press and hold on the reset button for 4-5 seconds to reset the
device. You could release the button when you hear “System reset”.
How to reset camera:
Note: the camera cannot be reset when It is powered off.
长按复位键
5
秒
11
1.Make sure your phone is connected with your 2.4G Wi-Fi. When your 2.4g
Wi-Fi connected correctly to your phone,your Wi-Fi name will be recognized
by the camera and pop-up on the Wi-Fi input page automatically.
2.Let your phone to forget your 5G Wi-Fi connection from your Phone Wi-Fi
list to avoid proity pick up.
3.Try to avoid your phone screen too light or too dark so that camera can
read the QR code clearly without reflecting light.
4.Put your phone, camera and router within 1.5ft to get a strong Wi-Fi signal
strength.
5.If you use sound wave method,make sure your phone volume is turned up
and your router ID + password no more than 32 digits.
6.Enable your router DHCP option and set your router to dynamic IP
addressing to avoid conflict with your other wireless devices for one static
IP address.
7.Reboot your router to reallocate your IP address and refresh your network.
8.Power on the camera and hold on the reset button for 4-5 seconds and then
release it when you hear “system reset” to reset your camera to default.