SOLINTEG MHT-10K-25 Скачать руководство пользователя страница 7

Страница: 7 / 88

User Manual

MHT-4~20K series

Safety Instructions

①

Before installation, please read this manual carefully and follow the instructions in this

manual strictly.

②

Installers need to undergo professional training or obtain electrical related professional

qualification certificates.

③

When installing, do not open the front cover of the inverter. Apart from performing work

at the wiring terminal (as instructed in this manual), touching or changing components
without authorization may cause injury to people, damage to inverters and annulment of

the warranty.

④

All electrical installations must conform to local electrical safety standards.

⑤

If the inverter needs maintenance, please contact the local designated personnel for

system installation and maintenance.

⑥

To use this inverter for power generation needs the permission of the local power supply

authority.

⑦

The temperature of some parts of the inverter may exceed 60° C during operation. To

avoid being burnt do not touch the inverter during operation. Let it cool before touching it.

⑧

When exposed to sunlight, the PV array generates dangerous high DC voltage. Please

operate according to our instructions, or it will result in danger to life.

⑨

When wiring the lithium battery terminals, please disconnect the breaker or switch of

the lithium battery in case of a physical injury caused by the high voltage.

※

Solinteg Technologies Co., Ltd. has the right not to undertake quality assurance in any of
the following circumstances:

①

Damages caused by improper transportation.

②

Damages caused by incorrect storage, installation or use.

③

Damages caused by installation and use of equipment by non-professionals or un-

trained personnel.

④

Damages caused by failure to comply with the instructions and safety warnings in this

document.

⑤

Damages of running in an environment that does not meet the requirements stated in

this document.

⑥

Damages caused by operation beyond the parameters specified in applicable technical

specifications.

※

2.1 Safety Notes

※

2.2 Statement

Содержание MHT-10K-25

























































































Результаты поиска

Содержание MHT-10K-25

Отзывы:

Похожие инструкции для MHT-10K-25

Бренды по названию

Популярные бренды

SOLINTEG MHT-10K-25, Руководство пользователя

Результаты поиска

Содержание MHT-10K-25

Отзывы:

Похожие инструкции для MHT-10K-25

Бренды по названию

Популярные бренды