Setting the alarm
1. Use the “MODE” button to switch the display to the alarm clock.
2. Press the “MODE” button for 2 seconds. The data on the display flashes.
Setting order: minutes-hours.
3. Use the “UP” button to set the requisite values. Press the button briefly to set
the value step by step; press it for longer for 8 steps per second.
4. Briefly press the “MODE” button to confirm the value and go on to setting the
next data.
5. In the alarm clock display mode use the “UP” button to turn the alarm clock
on/off. An icon shows that the alarm is on.
If you press the “SNOOZE” button while the alarm is sounding, the alarm stops and
is reactivated after 8 minutes. If you want to stop the alarm completely, press any
other button on the device. The alarm clock will be reactivated after 24 hours.
Hourly signal
1. Use the “MODE” button to switch the display to the alarm clock
2. Use the “UP” button to turn on the alarm clock function ( ), or hourly signal
function ( ) or both ( )
Note:
If you want to erase data or are experiencing difficulties with the device,
press the “RESET” button with a small object. The correct temperature is shown on
the display automatically within 8 minutes of inserting the battery.
