Solidyne MX 2400, Руководство пользователя, Страница: 20 / 30

3.6.6.1 Using a land line
1) Press the button 'PHONE'.
2) Open the knob 'STUDIO' to listen the dial tone at
the headphones.
3) Dial the number using MX2400's DTMF keypad.
To hang up and redial, release 'PHONE' and press
it again.
4) To talk, you can use the built-in talk-back
microphone, by pressing the 'Talk-back' button; or
an external microphone connected to any input.
5) Another option is to receive the calling from Studios.
In this case the 'Ring LED' will lights (blue) with
each ring. Calling takes by pressing 'PHONE'.
6) Before starting the audio transmission, you can
send a test-tone (by pressing "1KHz"), in order to
the operator at studios checks the audio level.
7) To ends the transmission, release 'PHONE' button.
The phone line will be released.
3.6.6.2 Using a cell phone
Usually, the cell phone is linked to the MX2400 via
Bluetooth (recommended) but if the mobile don't
have Bluetooth, you can connect it with a cable
adapter to the RJ-11. If using Bluetooth, remember
to pair the console with the phone before making the
call (see 3.6.3 - Connecting to a cell phone ).
1) To turn on Bluetooth in the MX2400, press the
button “BLUETH” and release just when LED lights.
If the cell phone is connected to RJ11, press the button
“PHONE” before dial.
2) The call is made from a cell phone liked to the
console. You may also receive the call from the
studios, but usually it is the reporter who
communicates with the radio.
3) To listen at headphones the ring tone, open the
knob 'BLUETH' at headphone section
(if connected
to the RJ-11 open the knob 'STUDIO').
4) To talk, you can use the built-in microphone,
pressing the talkback button, or a microphone
connected to an input (recommended in noisy
environments).

When the cell phone is linked via Bluetooth, depending on the
cellular model, it is possible to redial the last call by pressing
the button 'Blueth' on the console.
It is also possible to take an incoming call directly from the
console by pressing the button 'Blueth'.
5) Before starting the transmission, you can send a
reference tone (by pressing "1KHz") in order to the
operator at the radio station adjust the reception
level.
6) Ends a call: The calling can be finished by pressing
'BLUET' at the console; or directly from the cell
phone.
Do not forget to turn off Bluetooth when not used,
since this stage represents an unnecessary battery
drain.
SOLIDYNE CODEC–MIXER MX2400 Page 20