Solidyne HL 202, Руководство пользователя

Страница: 21 / 32

3 OPERATION
3.1 Managing phone lines
A button system allows each phone line taken from the hybrid (ON-
AIR) retained with on-air audio (HOLD) or transfer it to a telephone
set (OFF) .
The call is generated from an associated phone. But it can be
received with your partner or directly from the Hybrid, as a blue LED
(ring) flashes indicating incoming call.
The HOLD function is used to, once made (or received) the call,
take the phone line from the hybrid, allowing the caller to listen,
while waiting, the on-air signal.
In order to air the call, press AIR and open the corresponding
channel on the console.
The function OFF, disconnect the telephone line from hybrid and
connecting to the phone set. When the operator does not use a
telephone line, the switch must be OFF, so that the line was
connected to the phone set.
To receive a call line will be OFF, so that the call rings on the
phone.
If the phone is hung and you press OFF during a call, you will lose
communication. To transfer the line is on the air to the phone, you
must pick up it first and then press OFF.
In each line a LED indicates if the line is on hold (LED flashing) on
the air (LED on) or assigned to the phone set (LED off).
SOLIDYNE Telephonic Hybrids Page 21