Solidyne HL 202, Руководство пользователя

Страница: 12 / 32

Procedure
1. HL203-VQ: Enables discovery mode. With Bluetooth
switched off (LED off) press and hold the button BLUET (5
seconds) until the LED flashes alternating between green
and red, indicating discovery mode. Being in this mode
HL203-VQ can be found by the cell phone.

To enable Bluetooth, press and hold the button BLUET by 2 seconds.
Release the button just when LED lights. Led will flash in green slowly,
indicating Bluetooth enabled. If you hold BLUET button more that 2 seconds
(5 sec approx) Bluetooth toggle to “discovery” mode (toggling green and red).
2. At the cell phone , search for Bluetooth devices. This
procedure varies by brand and model cell, see the user's
manual of the phone.
3. When the phone finds the HL203's device, shows the code
“BTH008” or “BTM751” on screen. When the phone asks for
the password, enter 0000 (default). See your phone's manual
for details.
4. HL203's ID is now stored at the cell phone's memory. You
don't need to repeat this procedure for this phone. In the front
panel of the hybrid, the light will change to green flashing
slow, indicating that Bluetooth is active.

In some cell phones, it is necessary to "connect" the new device found to
active it. In others, the new device is activated after being detected.
If there were other systems operating in the Bluetooth studios, we commend
turning off Bluetooth on the MB-2400, to repeat the search with the cell and
write-down the existing devices. Then turn on Bluetooth in the HL203 and
repeat the search. The displayed (BTH-008) will HL203.
2.3.2.2 Re-connections
To reconnect the cell phone before linked, activate the HL203's
Bluetooth pressing by 2 seconds the button, and enables Bluetooth
at the cell phone (if necessary, some cell phones disables Bluetooth
device when turn it off). To make or receive a call, the audio is sent
to the hybrid.
Page 12 Telephonic Hybrids SOLIDYNE