Solidyne 462dsp, Руководство пользователя

Страница: 5 / 38

SOLIDYNE 462
dsp – broadcast digital processor Page 5
Chapter 1
Quick installation guide
1.1 Basic connect ion and settings
CONECTIONS
Power supply
Before plug in; check the position of the
AC VOLTAGE selector, on the rear panel
(200-240 V, 50/60Hz; or 100-130 V, accords
to correspond).
Inputs
Analogical audio inputs are balanced, using
XLR (female) connectors. Connect the
PROGRAM OUTPUTS of your console to
these inputs. Take care of not invert the
phase of the channels.
Optionally; the 462dsp has digital AES-3
(AES/EBU) input, for digital consoles or links.
This input supports 16/24 bits and sample
rates from 30 up to 96 KH. When the digital
input is used, we recommend connecting the
analogical inputs too. 462dsp will switch
automatically to these inputs in case of failure
on the AES-3 signal.
Outputs
Connects the 462’s MPX output (BNC) to
your transmitter exciter.
Power on
The unit has an ON/OFF switch on the rear
panel. The main screen Hill show a welcome
splash on start up; and then will load the last
used program.
SETTINGS
Controls
All settings values are entered using a
JOG Wheel. Turn the JOG to select
options and to change values. Pressing
briefly the JOG, confirms an option.
Pressing and holding the JOG (around one
second), go to the main menu. Each
screen graphically indicates the actions
available with the JOG (see figure).
Input
The default input level is +4 dBu. If your
console manages a different level, you
must adjust the processor input level.
Press briefly the JOG to enter to the main
menu. Choose the option “Setup Input”
and adjust the level according to the
nominal specified on your console.
Programs
Your radio already is on the air with the
sound of the Solidyne 462dsp. At this
point, you must be anxious to listen what
462dsp is able to do with the sound of your
radio on the air… to begin we will explain
briefly how to select the factory presets.
Tunes your radio in a good audio
equipment and do the following:
Turn the JOG. Note on the screen how
the different presets programs names
changes.
Pressing briefly the wheel load
the program , changing the processing
and the sound on the air.
The 15 PRESET PROGRAMS can not be
changed. You have 15 USER MEMORIES
to create your own adjustments. You can
start copying a preset program to a user
memory, and soon modifying it.