Solida systems SL-1000 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 34

Solida systems SL-1000 Скачать руководство пользователя страница 9

9

©

SOLIDA SYSTEMS INTERNATIONAL 2016

4. Configuring The Appliance

The configuration page contains several different user configurable areas. Each configuration

window includes a help button that provides a detailed help for the option.

4.1 Ethernet Port Configuration

The two network packet transferring ports, port 0 and 1 can be configured to either face the

Internet side or the LAN side. It makes no technical difference how these ports are configured. It is

recommended to keep the factory default setting.

Figure 4.1 Ethernet Port Configuration

Operating Mode

– The only supported operation mode is Single LAN/WAN ports.

Port 0 usage

– Selects if port 0 should be facing the Internet side or the LAN side.

Port 1 usage

– Selects if port 0 should be facing the Internet side or the LAN side.

4.2 Appliance Name

An appliance should be given a name. The name can be used as an identifier if more than one

appliance is installed in a network or if Solida Multi will be used for multi appliance monitoring.

The name can refer to the appliance geographical location or be a simple name such as solida_1.

The below figure shows how to set the application name:

«
...
7
8
9
10
11
...
»

Содержание SL-1000



































Отзывы:

Нет отзывов