◆
Installation & wiring
●Have the ship building work company install the winch to your fishing boat after consulting the shop.
If not firmly fixed, accidents may occur.
●Recommended: Ask ship building work company for wiring work.
Use a thick cable for wiring.
Recommended
：
250W12V cross section
＝
10mm
2
/ 250W24V cross section= 5.5mm
2
400W12V cross section= 16 mm
2
/ 400W24V cross section= 10mm
2
●Two lead wire connecting to both plug of Plus & Minus of Battery
In case voltage polarity is contrary, rotation of drum is contrary (It can rotate both ways)
◆
Maintenance
●Check bolts and damage of each part per use
●The gear box is lubricated permanently. No need to supply lubrication oil
Never decompose the gear box. It may cause injury or damage to the winch
◆
Trouble shooting
Symptom
Cause
Corrective action
Motor does not run
１．
Wire is cut or battery is not
well connected
２．
Switch is not good
３．
Breaker is damaged
４．
Battery is dead
５．
Winch is damaged
１．
Check all electrical connections
２．
Replace switch
３．
Replace breaker
４．
Replace battery
５．
Contact winch shop
Motor temperature too high
１．
Used long hours
２．
Damaged in use
１．
Cool down motor
２．
Contact winch shop
Motor runs but
low power and winch speed
１．
Battery is weak &
Lack remaining battery
２．
Wiring winch from battery
is too long &
Thin cable of wiring
３．
Contact failure of battery
４．
Winch is damaged
１．
Charge battery or exchange battery
２．
Change short distance wiring and
Replace thick cable
３．
Check battery terminal corrosion
Clean terminal if necessary
４．
Contact winch shop
Motor runs but
no drum rotation
１．
Gear box is damaged
１．
Contact winch shop
2022.02.22
MARINE BATTERY WINCH
USER’S GUIDE
