Solid RocketWAVE SRF-L-1835, Руководство по эксплуатации продукта

Страница: 9 / 24

SOLiD RocketWAVE™ SRF-L-1835 Product Manual
V1.6 - DEC 2021
© 2021 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary. Page 9
each service band’s DL input power is within rated range. The UL Gain must be maintained [DL Gain
±
2 dB]. If
the Isolation ATT value is set due to Isolation Check, the repeater can control AGC ATT within [30dB - Isolation
ATT]. The DL In/Output and DL/UL Gain value for AGC operation is described as follows.
[B3 1800 MHz]
DL Input (RSSI) DL Output DL Gain UL Gain
-57 dBm 7 dBm 64 dB 64 dB
-52 dBm 12 dBm 64 dB 64 dB
-47 dBm 12 dBm 59 dB 59 dB
-42 dBm 12 dBm 54 dB 54 dB
-37 dBm 12 dBm 49 dB 49 dB
-32 dBm 12 dBm 44 dB 44 dB
-27 dBm 12 dBm 39 dB 39 dB
-22 dBm 12 dBm 34 dB 34 dB
[N78 3600 MHz]
DL Input (RSSI) DL Output DL Gain UL Gain
-60 dBm 12 dBm 72 dB 72 dB
-54 dBm 18 dBm 72 dB 72 dB
-49 dBm 18 dBm 67 dB 67 dB
-44 dBm 18 dBm 62 dB 62 dB
-39 dBm 18 dBm 57 dB 57 dB
-34 dBm 18 dBm 52 dB 52 dB
-29 dBm 18 dBm 47 dB 47 dB
-24 dBm 18 dBm 42 dB 42 dB
Auto Level Control (ALC) for UL over-input
This function is that preventing and maintaining the signal quality degradation due to UL’s over input power satu-
ration. The attenuator is located after UL Low Noise Amplifier (LNA). The UL In/Output and UL Gain for ALC op-
eration is described as follows.
[B3 1800 MHz]
UL Input (RSSI) UL Output UL Gain
-46dBm 18dBm 64dB
-41dBm 18dBm 64dB
-36dBm 18dBm 59dB
-31dBm 18dBm 54dB
-26dBm 18dBm 49dB