Solid State Logic XL-Desk Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 40

Solid State Logic XL-Desk Скачать руководство пользователя страница 15

XL-Desk – Owner’s Manual Page 11

Stereo Cue and Mono Auxes

XL-Desk has a

STeReO CUe

bus which can be sent to using the green level pot and panned with the blue pot. The Stereo

Cue is switchable between pre or post-fader, on a per-channel basis using the

POST

button. During tracking, the Stereo

Cue could be used for an artist’s headphone mix. For mixing, the Stereo Cue could be used to send to an FX unit for
reverb/delay.

Aux 1 and Aux 2 are mono sends, which would normally be connected to outboard FX processing like reverbs and delays.
Aux 1 is also suitable for the creation of a second headphone mix. Aux 1 and Aux 2 are globally switchable between pre
or post-fader, in the

MASTeR TRIMS

section.

Using the ALT input button when mixing

When mixing, the

STeReO CUe

can source the input that is currently not selected as the main input to

the channel. This is done by pressing the

ALT

(alternate input) button. For example, if

DAW

is selected

as the main input to channel 9, then pressing

ALT

would bring

LINE INPUT 9

into the Stereo Cue for that

channel. The green pot is used to control level whilst the blue pot positions the source within the Stereo Cue
field. Finally, the

TO A

button underneath the

STeReO CUe MASTeR TRIM

can be used to inject the all signals

on the Stereo Cue bus into Mix Bus A. Using this method will provide an extra 16 inputs to the mix.

Pan Pot, Mix Bus Assignments, CUT, SOLO and Faders

At the base of XL-Desk you will find traditional analogue desk functions.

The blue

PAN

pot controls the channel’s left/right positioning in the stereo field when assigned to one

or more stereo mix bus.

A B C D

buttons will route the channel to the relevant stereo mix bus: Mix A, Mix B, Mix C, Mix D.

CUT

mutes the channel’s output.

SOLO

- The exact action of the solo is dependant on the desk’s current solo mode:

Solo-in-place

(

SIP

) or

AFL

(

After-Fader-Listen

).

See page 17 for additional information.

The space below the

SOLO

button provides enough room to stick the traditional strip of electrical tape

to write track names on.

The 100mm analogue fader provides a gain control for feeding the selected stereo busses and/or direct
channel output if

CHOP POST

is selected.

«
...
13
14
15
16
17
...
»

Содержание XL-Desk









































Отзывы:

Нет отзывов