Reproduction is permitted provided copyright information is intact.
MOUNTING AND ATTACHING THE CABLE
As you look at the antenna, you will
see that the mounting point has an
adjustment to help you keep the antenna
pointed properly. In most cases this
should not be used. Instead, level and
plumb the mast properly.
Mount the antenna on the mast by
sliding it on so that the rear mounting
clamps can bite into the mast. Tighten
the wingnuts evenly. It might help to
start with the top clamp, get it nice and
snug before proceeding to the bottom
clamp.
Once the clamps are tight enough to
hold the antenna, you can aim the whole
antenna by swiveling it on the mast.
You can also loosen the wingnuts at the
hinges and point each half of the antenna
separately. Remember to tighten the
wingnuts when you are done.
