IMPORTANT INFORMATION ABOUT INSTALLING
• This appliance is NOT intended for use in a commercial environment.
• Please observe the installation instructions provided and note that this appliance
should only be installed by a qualified technician.
• The appliance is fitted with a plug and must only be connected to a properly
installed earthed socket.
•
In case a new socket is needed, installation and cable connection must only be done by a
quali fied electrician. If the plug is no longer accessible following installation, a pole
disconnecting device must be present on the installation site with a contact gap of at least
3 mm.
•
Adapters, multiway strips and extension cords must not be used. Overloading can result
in fire.
• If the appliance is not fitted with a supply cord and a plug, the connection equipment must
have a contact separation in all poles that provide full disconnection, and the appliance
must be incorporated in the fixed wiring in accordance with the wiring rules.
The accessible surface
may be hot during
operation.
9
