Soleus GPS One
4.4) How to Turn ON the GPS:
Following are 2 ways to turn on the GPS.
4.3.1)
Press S1
while in TIME mode.
o
The watch will start to search for GPS signal and go to “GPS GO” screen (once
Satellite signal is received).
4.3.2)
Press S7 to go to RUN mode.
o
The watch will start to “search GPS” signal and go to “GPS GO” screen (once
Satellite signal is received).
4.5) How to turn OFF the GPS:
4.4.1)
Press and hold S7 while GPS is initially ON.
o
The watch will display “OFF GPS”.
GPS signals and its meaning:
Step 5) Go for a Run:
5.1)
Using Run mode
:
5.1.1)
Press S7 or S1 from Time mode to go to RUN mode. The watch will start to search
for GPS signal and go to “GPS GO” screen (once Satellite signal is received).
5.1.2)
Press S5 to change the following views:
o
Chrono / Chrono / GPS GO (this view won’t appear if chrono is running)
o
Pace / Distance / Chrono
o
Speed / Distance / Chrono
o
Calorie / Distance / Chrono
o
Chrono / Distance / Chrono
o
Distance / Distance / Chrono
5.1.3)
Press S1 to Start.
5.1.4)
Press S11 to take manual LAP.
5.1.5)
Press S1 to stop after completing your run.
5.1.6)
While the chronograph is stopped, press S5 to view your current data before
saving.
o
Stop / Distance / Chronograph
o
Calorie / Ave Pace / Max Pace
o
Calorie / Ave Speed / Max Speed
o
Lap / Split / Lap number
5.1.7)
Press and hold S1 to reset.
Watch reset:
The user can reset the watch by pressing and holding S1, S5, S7 and S11 together.
Battery:
The Watch is powered by a built-in lithium-ion battery
that will require approximately 4.0 hours
charging time using the USB cable.
Water Resistant:
The watch can withstand up to 3ATM.
Water damage may occur if the buttons are pressed underwater.
