background image

PROBLEM

   

 

 

The Air Conditioner will not start
 

 

 
 
 
 
 
 
 
 

POSSIBLE CAUSES 

 

The air conditioner is unplugged 

 

 
 
The fuse is blown/circuit breaker is 
tripped. 

 
 

Power Failure 

 
 
 
 
 
 
 

The current interrupter device is 
tripped. 

SOLUTIONS 

 

• 

Make sure the air conditioner is 
plug is pushed completely into the 
outlet 

 

• 

Check the house fuse/circuit 
breaker box and replace the fuse 
or reset the breaker. 

 

• 

The unit will automatically re-start 
when power is restored. 

• 

There is a protective time delay 
(approx. 3 minutes) to prevent  
tripping of the compressor      
overload. For this reason, the unit 
may not start normal cooling for 3 
minutes after it is turned back on. 

 

• 

Press the RESET button located 
on the power cord plug. 

• 

If the RESET button will not stay 
engaged, discontinue use of the 
air conditioner and contact a   
qualified service technician.

 

TROUBLESHOOTING 

The Air Conditioner does not cool 
as it should 

 

 
 
 
 
 
 
 
 

Airflow is restricted 

 

 
 
The temperature control may not be 
set correctly. 

 

The air filter is dirty 

 
 

The room may be too warm 
 
 
 
Cold air is escaping 
 
 
The Cooling Coils are frozen 

• 

Make sure there are no curtains, 
blinds, or furniture blocking the 
front of the air conditioner 

 

• 

Lower the set thermostat tempera-
ture 

 

• 

Clean the filter. See the Cleaning 
and Care Section of the manual. 

 

• 

Please allow time for the room to 
cool down after turning on the air 
conditioner. 

 

• 

Check for open furnace registers 
and cold air returns

 

 

• 

See “Air Conditioner Freezing Up” 
below. 

The Air Conditioner is freezing up 

 

Ice blocks the air flow and stops the air 
conditioner from cooling the room 

• 

Set the MODE dial to HIGH FAN 
or HIGH COOL and set the ther-
mostat to a higher temperature 

The Remote Control is not working 

 
 

The batteries are inserted incorrectly 
 
The batteries may be dead 

• 

Check the position of the batteries.    

 

• 

Replace the batteries 

 12 

Содержание SG-WAC-06ESE

















Отзывы: