CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS (Refer to the images on page 9)
1)
Power On and Off
- Press the
POWER
button once to manually turn the unit on. Press the
POWER
button once more to turn the unit off.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Auto mode,
Air Conditioner, Dehumidifier, Fan only, and Heater mode.
3)
Fan Speed Control
- Press the
FAN SPEED
Button to cycle through the different fan speeds:
High,
Medium, and low
. The fan speed can be visually distinguished by the speed of the digital air segments
progressing out from the windmill fan image on the led control display. There is an additional
auto
speed
setting that is enabled in only heating and cooling modes. This speed is next setting after low when press-
ing the speed control button. The speeds will cycle through in this order:
High, Medium, Low, Auto
. Each
change in speed will be associated with a “beep” sound from the unit.
4)
Temperature
- Select the desired temperature by pressing either
▼
or
▲
key when using the unit in
cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After
the temperature is set, the unit will display this temperature setting until it is changed by the user. The led
control display shows temperature in Celsius or Fahrenheit. Press the
▼
and
▲
simultaneously to change
from °
C
to °
F
.
5)
TIMER*
- To program the Auto-on timer, first press the
TIMER
button when the unit is off. Once the
TIMER
button
is pressed the hours will blink on the display. Press the
▼
or
▲
buttons to change the
number to the desired hours for the unit to automatically turn on. To program the unit to turn off automati-
cally press the
TIMER
button when the unit is on to set the off timer. The display will flash the hours to
turn off the unit. Press the
▼
or
▲
buttons to change the hours to the desired time for the unit to automati-
cally turn off. The timer is set when the auto-off time stops flashing.
*NOTE: For a more sophisticated clock timer, use the included LCD remote control.
OPERATING THE UNIT USING THE CONTROL PANEL
Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button on the control panel.
4) Press the Mode button until the “
” icon appears on the led control display
5) Press the
▲
or
▼
buttons until the desired room temperature appears on the control panel
display. The temperature ranges from 61
°
F - 88
°
F (16
°
C - 31
°
C).
6) Select the desired fan speed by pressing the
FAN
button.
NOTE:
During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest
setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and
window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.
10
