$
CONTROL PANEL BUTTONS
1)
Power On and Off
- Press the
POWER
button once to manually turn the unit on. Press the
POWER
but-
ton once more to turn the unit off.
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
TIMER
SPEED
MODE
POWER
TEMPERATURE
COOL
BUCKET FULL
FAN
DRY
HIGH
MEDIUM
LOW
Bucket Full
Indicator
Mode Selection
Button
Increase
Temperature/Timer
Button
Signal Receiver
POWER
ON/OFF
Button
Fan Speed
Button
Air Conditioner
Mode
Indicator
Dehumidifier
Mode
Indicator
Fan Speed
Indicators
Fan
Mode
Indicator
Timer
Button
Decrease
Temperature/Timer
Button
88
72
OPERATING INSTRUCTIONS
CONTROL PANEL
3)
Temperature
- Select the desired temperature by pressing either ▲ or
▼ key when using the unit in
Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting. Af-
ter the desired temperature is set, the temperature indicator will flash 10 seconds before it returns to
current room temperature. The temperature indicator display shows temperature in Fahrenheit.
- This unit has '-way directional louvers. Use the louver guides manually to direct
air up and down.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Air
Conditioner mode, Dehumidifier (Dry) mode, and Fan only mode. Each press of the MODE button will
light up a different icon on the control panel. The exhaust hose and window kit must be installed when
the unit is in Air Conditioner, and Dehumidifier mode. When using the unit as a fan, it is not necessary
to keep the exhaust hose and window kit connected to the unit.
4)
Bucket Full
- When the unit cannot evaporate the collected moisture fast enough, the excess water will
collect in a backup water tank located inside the unit. Once the tank is full, Bucket Full indicator will light
up.
5)
Louver Direction
6)
TIMER -
Press the
TIMER
button to turn the unit auto-on or auto-off. Set the timer by pressing either ▲
or▼ button.
