•
2 - MEDIUM BLACK SPRING WASHERS
•
2 - MEDIUM GREY WASHERS
•
4 - WHEELS
•
4 - WHEEL SCREWS
•
4 - SMALL BLACK SPRING WASHERS
•
4 - SMALL GREY WASHERS
IN THE BOX
•
MICATHERMIC HEATER
•
INSTRUCTION BOOKLET
•
WALL MOUNTING BRACKET
•
4 - DRY WALL ANCHORS
•
4 - MOUNTING SCREWS
•
2 - LEGS
•
2 - LEG SCREWS
4
Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will
automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To
continue operation, turn on the heater using the supplied remote control or the control panel on the heater.
Overheat Safety Feature
This heater is equipped with a overheat safety feature. When the heaters internal components reach a certain
temperature that could cause overheat and possible fire, the heater will automatically shut off. To reset the
heater, unplug the heater power cord from the electrical outlet for 10 minutes. After 10 minutes, plug the
heater into the electrical outlet and turn on using the supplied remote control or the control panel on the heater.
WARNING
:
It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet
and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet.
Contact a qualified electrician to inspect the original outlet for damage.
SAFETY FEATURES
POLARIZED PLUG
POLARIZED
OUTLET
Polarized Plug
Warning: This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into a polar-
ized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to mod-
ify the plug in any way.
DO NOT DEFEAT THE SAFETY PURPOSE OF
THE POLARIZED PLUG.
