WINDOW KIT INSTALLATION
Installation of the Venting Kit
FOR
SINGLE HOSE
PORTABLE AIR CONDITIONERS
The venting kit must be installed in order for the unit to
work correctly in the air conditioning mode. The venting
kit should not be used while the unit is heating or
fanning.
The window kit has been designed to fit into most
vertical and horizontal window openings. The window kit
can also be used in a sliding door.
1.
Choose a suitable location, near a grounded
electrical outlet and a suitable window or door.
Remove packaging and locate components. (Figure
A)
2.
Slide the exhaust connector over the discharge
opening on the back of the unit. (Figure B)
3.
Connect the exhaust hose to the exhaust connector,
aligning the fitted grove
.
(Figure C)
4.
Open the window or door and adjust the length of
the window kit to fit the opening. (Figure D) If
necessary, mark the kit and cut one end down to
properly fit the opening. (Figure E&F)
5.
Attach the window kit adapter to the window kit.
(Figure G)
6.
Place the window kit back into the window and
attach the exhaust hose to the window kit adapter.
(Figures H & I) Close the window tightly. (Figure J)
Your portable Air Conditioner is now ready to cool!
NOTE: When using the venting system, keep the exhaust
hose as straight as possible. The exhaust hose can be
shortened, but it is not recommended to increase the
length of the exhaust hose. Do not use an extension
cord with your portable air conditioner.
Optional Window Kit Adapter Extension (Included)
The Window Kit Adapter Extension is an optional part
that can be used on window sizes that require a longer
connection between the window and the exhaust hose.
NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and
images
show general directions for Soleus Air hose portable air condition
er
s.
7