14
REMOTE CONTROL OPERATING INSTRUCTIONS
1)
Power On and Off
-
If the unit is already on, press the
POWER
button on the remote while pointing
the remote away from the unit. This will turn the remote on. If the unit is off, now press the
POWER
button
once to manually turn the unit on. Press the
POWER
button once more to turn the unit off. When in Air
Conditioner mode, the selected temperature will appear on the remote-control LCD display. When the unit is in
Fan mode, Dehumidifier mode and Auto mode, no temperature will be displayed. This shows that temperature
selection is not available when the unit is in Fan mode, Dehumidifier mode, and Auto mode.
2)
Mode Selection
-
Press the
MODE
Button repeatedly to cycle between the different modes: Air
Conditioner, Dehumidifier, Fan, Heat and Auto. The left side of the remote-control LCD display will light up
showing which mode is selected. An arrow ◄ will display next to the mode that is selected, indicating which
mode the unit is currently operating in.
3)
Fan Speed
-
Press the
FAN
speed button to cycle through high, medium, low, and auto fan speeds.
The display on the remote control will show an arrow ► by the current fan speed on the remote-control LCD
display. When the unit is in Air Conditioner mode, Heat mode and Auto mode, the fan speeds will cycle through
in this order: High, Medium, Low, Auto. When the unit is in Dehumidifier mode, the fan
speeds will only in auto fan speed. When the unit is in Fan mode, the fan speeds will cycle through in this
order: High, Medium, Low. Each change in speed will be associated with a “beep” sound from the unit.
4)
Temperature Setting
-
When the unit is in Air Conditioner mode or Heat mode, you can select your desired
temperature. Press the ▲ or ▼ to select your desired temperature setting. The temperature on the LCD display
on the remote control will increase or decrease accordingly. Pressing the
°C
/
°F
button will change the
temperature select between °C and °F.
5)
SLEEP MODE -
To set Sleep mode, make sure the unit is in Air Conditioner mode, Heat mode,
Dehumidifier mode or Auto mode. Press the
SLEEP
Button on the remote control, the remote control will
show an arrow ▲ under the “SLEEP” icon on the remote-control LCD display. When in
SLEEP
mode, the fan
will run on low to keep fan noise at minimum. The temperature setting will gradually increase to 1°F above the
original set temperature for each of first 2 hours. The unit will keep operating the same temperature for 6 hours
and switch to standby mode.
6)
TIMER
-
Auto-On:
To program the timer, when the unit is off, point the remote at the unit and press the
TIMER
button.
Once
TIMER
is pressed, the arrow ▼ will display above the TIMER ON icon on the remote-control LCD
display as standby mode. Press the arrow buttons ▲ or ▼ to set the timer. The timer can
be set in intervals of 0.5 hours up to 10 hours, then in intervals of 1 hour up to 24 hours. Once the desired time
is selected, press the
TIMER
button once more to set it. The arrow ▼ will display above the TIMER ON icon
on the remote-control LCD display to indicate that the timer has been set.
Auto-Off:
While the unit is operating, point the remote at the unit and press the
TIMER
button. Once the
TIMER
is pressed, the arrow ▼ will display above the TIMER OFF icon on the remote-control LCD display.
Press the arrow buttons ▲ or ▼ to set the timer. The timer can be set in intervals of 0.5 hours up to 10 hours,
then in intervals of 1 hour up to 24 hours. Once the desired time is selected, press the
TIMER
button once more
to set it. The arrow ▼ will display above the TIMER OFF icon on the remote-control LCD display to indicate
that the timer has been set.
7)
SWING
-
To turn on oscillation, press the
SWING
button on the remote control when the unit is in air
conditioner mode, heat mode, fan mode, and dehumidifier mode. The remote control will show an arrow ► by
to the “SWING” icon on the remote-control LCD display. Once you press
SWING,
the louvers on the unit will
oscillate up and down.
