STEP 2:
SLIPFITTER MOUNTING
The slipfitter mounting fits a
2 3/8
” O.D. tenon. Place
the slipfitter over the tenon and secure the fixture
with the two Set Screws on the side of the slipfitter.
Off-Grid Area Light
STEP 1:
Take out the fixture and the tools from the package.
v
Please be sure to check that
everything is in the box
1 x Remote
(
CU-ALL2)
1 x Solar Panel
a. Adjust the angle of the fixture. Align the white
lines w/ numbers and the arrows on the
fixture. Loosen the screws and swivel the
fixture to the desired angle, then re-tighten the
screws.
b.
INSTALLATION INSTRUCTIONS
SL-SAL-OG-30W-50K-SF-G1
READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. This product must be installed in accordance with the applicable installation code by a person familiar with
the construction and operation of the product and the hazards involved.
1 x Fixture
1 x 5mm allen wrench
1 x 6mm allen wrench
2 x AA Batteries
1 x Manual
1 x Solar Panel Base
1 x Slipfitter
*(4 set screws pre attached)
*(3 set screws pre attached to top of fixture, remove
*(2 set screws included in Box 1,
attaches to the solar panel hinge)
BOX 1
BOX 2
BOX 3
and reinstall once solar panel base is placed)
