Solera E-112, Инструкция пользователя и руководство по обслуживанию

Страница: 27 / 78

D r i n k c o o l e r s U s e r ’ s i n s t r u c t i o n s a n d m a i n t e n a n c e m a n u a l
SL310008810 Ed.00 - 11-2012
- 9_EN-
ENGLISH
At the front side there are two
switches to start the machine working
(see Fig.4):
- General / Mixer ( / ) ; to start
the machine.
- Cold ( ) ; to cool the product.
The thermostat is regulated, in the factory, at
4º C.
The electronic thermostat stops to cool the
product when its temperature reaches 4º C.
If you want to modify the service
temperature, please do it as follows
(see
Fig. 5) :
1º) Make sure that the General switch and
the Cold switch are turned on.
2º) Press the arrow . The display will
show PrG , and within 3 seconds, press the
arrow to enter in the temperature
regulation. Now the display is indicating the
fixed temperature.
3º) Press the arrows to adjust
the electronic thermostat at the requested
temperature, which can vary between 0°C ÷
10°C.
4º) Wait 5 seconds to leave the
temperature regulation (during these 5
seconds, do not press anything). The display
will show the liquid temperature again.
OPERATION
SWITCHING ON POWER AND COOLING SYSTEM
Figure 5
Figure 4
TEMPERATURE CONTROL