-5-
Instructions for use and safety
Tools needed.REFERENCE COMPOSITION; 1 DOOR; 2 DOORS, 2-MULTIPOINT-SOCKET.
Safety and usage tips.
Description and components:
: - Dimensions 688x505x86 – Flush-mounted installation – Steel-sheet frame and door. Thickness 1mm,
painted in white at 180ºC. 1-Frame; 2-Door; 3 * - 2-multipoint-socket 2P + T, 16A 250V (not in all models);
4- Sliding closure **. ** Lock optional (CER-1300L2).
Normative:
- Follow these instructions to comply with the R.D. 842/2002 and Telecommunications R.D. 346/2011.
- Installation, service and maintenance of the electrical equipment may be carried out by anauthorized person only.
General view:
Tubes assembly: A Open the necessary holes in the boxes to fit the tubes provided. B Cut the pieces that
are needed and place them in the holes.
Opening of double doors: (only for 5560MET/2 and 5560MET/2B). A Open the left door by sliding latch.
B move upper and lower pivots until the right door is released. C open the right door. To close the doors will
act in reverse order, blocking the door with the pivots.
Technical information: -Temperature limit for storage, transport and installation.
Lock assembly (CER-1300L2, not included): A Remove the lid. B Insert the lock and position the lock tab as
indicated in the picture. C Screw the nut. D check the position of the lock tab and its correct operation:
a) Open door; b) Close door. E external view. Key position open. Key position close.
Product maintenance: -Wipe the surface of the boxes with a damp cloth.
Product recycling: -Contact the point of sale, local authorities or the manufacturer.
3
1
2
4
5
6
7
8
9
10
11
ENGLISH
* Annex of information related to the WEEE II directive:
The enclosure of this product is not affected by Directive 2012/19/EU WEEE II, but the EEE devices
(multi-point socket described in point 3 of this instruction) incorporated in the interior, it is affected in
individual form. Do not throw them in the trash, recycle them. This device is marked with the symbol of
compliance with the European Directive 2012/19 /EU on Waste Electrical and Electronic Equipment
(WEEE II). This symbol on the equipment or on its packaging indicates that the present product cannot be
treated as normal household waste. It must be delivered to the corresponding collection point for electrical
and electronic equipment (free of charge).
12
Halogen Free
Mode d'emploi et de sécurité
FRANÇAIS
Outils nécessaires: COMPOSITION DE REFRENCES; 1 PORTE; 2 PORTES, BASE AVEC 2 PRISES.
Montage des tubes: A Ouvrir les fenêtres nécessaires dans les boîtes pour s'adapter aux tubes fournis.
B Coupez les morceaux nécessaires et placez-les dans les fenêtres.
Ouverture des doubles portes: (uniquement pour 5560MET/2 et 5560MET/2B). A Ouvrir la porte gauche en
faisant glisser le loquet. B déplacez les pivots supérieur et inférieur jusqu'à la porte droite soit relâchée.
C ouvrir la porte droite. Pour fermer les portes agira dans l'ordre inverse, en bloquant la porte avec les pivots.
Vue d'ensemble:
La réglementation:
-Suivez ces instructions pour se conformer à la réglementation basse tension R.D. 842/2002 et des
télécommunications R.D. 346/2011.
-Installation, entretien et maintenance des équipements électroniques ne peuvent être effectués par une personne autorisée.
Description et composants:- Dimensions 688x505x86 - Installation encastrée -Cadre et porte en tôle d'acier.
Épaisseur 1mm, peint en blanc à 180ºC. 1-Cadre; 2 portes 3 * - 1 base avec 2 prises 2P + T, 16A 250V (pas
toutes les modèles); 4- Fermeture coulissante **. ** Possibilité de mettre une serrure (CER-1300L2).
2
3
1
4
5
6
