SkyWay-GB-R Quick Start Guide
3. Power and Ground
Note: For initial power-up, the Transmitter may be off (disabled).
The user needs to log into the radio Web interface to enable the
radio and set the frequency.
4. Set Alignment Mode
Connect power cables
by pushing the wires
into the connector or
use a small bladed
tool to hold open the
contacts
Grounding is a re-
quired step. Insert
ground wire and
tighten with
5/16” wrench.
•
Press the reset button for ~ 1 second. Verify Alignment
Mode’ LED is blue on each Radio.
•
Remove cover from BNC connector.
•
Connect RSL test cable to BNC connector
Verify power LED is lit.
Verify blue ‘Alignment Mode” LED.
Press button again to return to
normal ATPC mode.
Connect RSL test cable
and place voltmeter with
readings in view.