Attaching network interface lo0... done.
Loading... 4365424
Starting at 0x10000...
ataDrv returned ERROR from usrRoot.
ataDrv returned ERROR from usrRoot.
Error during ataDevCreate: d0003
Attached TCP/IP interface to mv unit 0
Attaching interface lo0...done
Adding 8580 symbols for standalone.
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]]
(R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]]
]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]]
]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]]
]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]]
]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]]
]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]]
]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc.,
1984-2003
CPU: 7447A Power PC. Processor
#0.
Memory Size: 0xe000000. BSP version 1.0/
0.
WDB Comm Type: WDB_COMM_END
WDB: Ready.
Note that there are only 3 seconds to modify configuration: if the first letter is not “m”, the
system will automatically start up, causing configuration failure.
L3 booting
c -config, p - display, b -boot parameter, h/? - help, @ boot
[BOOT]: c
'.' = clear field; '-' = go to previous field; ^D = quit
btsId : 160
：
Configure base station ID specified in EMS
vlanId (0~4095) : 0
：
Configure vlan port
dataSource(0-bts/1ems): 0
：
Configure base station startup source
ems IP : 192.168.17.125 192.168.11.199
：
Configure EMS
server IP
emsRcvPort(D=3999) : 3999
：
EMS port number, usually d
efault
btsRcvPort(D=8002) : 8002
：
bts port number, usually d
efault
