Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV. (i.e., an antenna, a standard cable system).
Press Menu/Set button to display the main
OSD menu.
Select the TV main menu.
Press Menu/Set button to enter the sub menu.
Select
Channel Type(ATV)
or
Channel Type(DTV).
Select the
Channel Type(ATV)
Menu/Set button
and press Exit button. You can select Channel
Type(Air/Cable) and System Type(NTSC/PAL-M)
in Sub Menu “Channel Type”.
Select the
Channel Type(DTV)
with
button and press Exit button.
You can select directly Air / CABLE / HRC / IRC.
Press Menu/Set button to display the main
OSD menu.
Select the TV main menu.
Press Menu/Set button to enter the sub menu.
Select
Auto Scan
with buttons and
press Menu/Set button on the remote control.
Then the tuning bar will appear and scanning
will start.
Setting the Channel
29
Choosing the Channel Type
1
2
3
4
5
6
Storing Channels Automatically
1
2
3
4
TV
Channel Type(ATV)
Channel Type(DTV)
Auto Scan
Add/Del
Fin Tune
Edit
CABLE
CABLE
Add
¥
¥
¥
Move Adjust Exit
TV
Channel Type(ATV)
Channel Type(DTV)
Auto Scan
Add/Del
Fin Tune
Edit
CABLE
CABLE
Add
¥
¥
¥
Move Enter Exit
TV
Channel Type(ATV)
System Type
Air
NTSC
¥
¥
Move Adjust Exit
Auto Scan
Air / Cable
Channel
Frequency
Find Channel
Broadcasting
STOP
Cable
13
255.865MHz
0
Analog TV
9 %
(ATV Scan)
Auto Scan
Air / Cable
Channel
Find Channel
Broadcasting
STOP
Cable
0
0
HDTV
9 %
(HDTV Scan)
Содержание SPTV42AS1D
Страница 1: ......