Model
SE578SA
Service
Replacing Parts
Parts
11. Incline Motor
Rev.
Procedures：
4.
Use two 14mm wrenches to release
3/8
"
x2-1/2
"
Hex Head Bolts,
3/8
"
x19x1.5T Flat Washers and
3/8
"
x7T Nyloc Nuts which secure
Incline Motor and Incline Device, as
shown in figure 6.
5.
Use Phillips head screw driver to
release 5x16 Tapping Screw and the
Ground wire and pull it out after
cutting the wire tie to take apart the
Incline Motor, as shown in figures 7
and 8.
5
6
7
8
