Sole Fitness LCB, Руководство пользователя

Страница: 9 / 26

LCB FITNESS BIKE 7
1. Insert the Computer Cable (
29
) and two Hand pulse cables (
26
&
28
) into the
connectors in the back of the Console (
34
).
2. Attach the Console (
34
) onto the Console Mast (
2
) with four Phillips Head
Screws (
58
).
3. Attach the Front Stabilizer Cover (
40
) and the Rear Stabilizer Cover (
41
) to the
Main Frame (
1
) with four Phillips Head Screws (
58
). Tighten with the Phillips
Head Screw Driver (
93
).
4. Install the Pedals (
45
L,
46
R) onto the Cranks by using the 13/15mm Wrench
(
92
). Remember that the left pedal has a reverse thread and will be screwed
into the crank in the opposite rotation from normal threads. There is an L
stamped into the end of the threaded post of the left pedal and an R on the
end of the right post. Make sure to tighten the pedals as much as you
possibly can. It may be necessary to re-tighten the pedals if you feel a
thumping while pedaling the bike. A clicking noise or thumping feeling is
usually caused by loose pedals.
5. Attach the seat (
19
) to the seat post (
7
) using the 12/14mm Wrench (
100
).
PLASTIC
PARTS
4
HARDWARE
STEP 4
1. Remove the plastic tie that is holding the plastic cover on the center of the
handlebars.
2. Attach the Handle Bar (
3
) to the Front Console Mast (
2
) with the two Hex
Head bolts (
51
), two Flat Washers (
72
) and two Split Washers (
103
). Tighten
using the 12/14mm Wrench (
100
).
HANDLE
BAR
3
HARDWARE
STEP 3
#51
. 5/16” x 5/8”
Hex Head Bolt (2 pcs)
#72
. 5/16” x 18 x 1.5T
Flat Washer (2 pcs)
#103 . 5/16” x 1.5T
Split Washer (2 pcs)
#58 . M5 x 12mm Phillips
Head Screw (8 pcs)
See page 8 for illustration