Sole Fitness F80 Скачать руководство пользователя страница 4

Страница: 4 / 47

WARNING

- Read all instructions before using this appliance.

DANGER

- To reduce the risk of electric shock disconnect your SOLE treadmill from the electrical

outlet prior to cleaning and/or service work.

WARNING

the treadmill plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE

OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING

IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet

and treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between

Keep children away from the treadmill. There are obvious pinch points and other caution

areas that can cause harm.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

Do not use outdoors.

from the outlet.

Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

The pulse sensors are not medical devices. Various factors, including the user’s movement,

exercise aids in determining heart rate trends in general.

Use handrails provided; they are for your safety.

IMPORTANT

SAFETY INSTRUCTIONS

F80

F83

F85

TREADMILL

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

The pulse sensors are not intended to support the user's weight. For support when using the

treadmill and during dismounting use the side handrails.

Содержание F80
















































Результаты поиска

Содержание F80

Отзывы:

Похожие инструкции для F80

Бренды по названию

Популярные бренды

Sole Fitness F80, Руководство пользователя

Результаты поиска

Содержание F80

Отзывы:

Похожие инструкции для F80

Бренды по названию

Популярные бренды