Dyaco Canada Inc
.2013
-18-
USER PROGRAMS
1. Select
User 1
or
User 2
via the
Speed
/
keys then press
Enter
. Note that the dot matrix display portion will have a single
row of dots at the bottom (Unless there is a previously stored
program). If there is a program stored under the button that is
pressed, it will be retrieved. If not, you have the option of
programming in your first name. The
Message Window
will
display and flash the letter “A” . To change it, press the any
key, then “B” will be displayed; if the any
key is pressed, the
letter “Z” will be displayed. After selecting the appropriate letter,
press
Enter
. The letter “A” will again be displayed and blinking.
Repeat the procedure until all letters of your first name are
programmed (7 characters maximum). When your name is
displayed, press
Stop
and it will be stored under either
User 1
or
User 2
.
2. Next the
Message Window
is flashing
Age
. Use the
Incline
/
keys to adjust. Press
Enter
. This is a must to continue even
if age is not adjusted.
3. The
Message Window
will now be blinking a body weight value. Enter your body weight and press
Enter
.
4. The
Time Window
and
Message Window
will now be blinking a
Time
value. Adjust the
Time
and
press
Enter
.
5. The first column (segment) will now be blinking. Using the
Speed
/
or
Quick
keys, adjust the
speed level to your desired effort for the first segment then press
Enter
. The second column will now
be blinking. Repeat the above process until all segments have been programmed. The first column
will be blinking again. This is for the incline programming. Repeat the above process to program all
segments for incline.
6. Press the
Start
button to begin the workout and also save the program to memory.
