Sole Fitness 16608608950, Руководство пользователя

Страница: 14 / 44

14
customerservice@dyaco.ca
Dyaco Canada Inc. 2016
4
PLASTIC COVERS
HARDWARE STEP 4
#152. M5 × 15mm
Phillips Head Screw
(14 pcs)
#153. 3.5mm × 12mm
Sheet Metal Screw (8pcs)
#154. 4mm × 15mm
Sheet Metal Screw
(2pcs)
1. Secure left Connecting Arm Cover (121) on left Connecting Arm with M5
× 15mm Phillips Head Screws (152) then secure left Connecting Arm
Cover (119) with two M5 × 15mm Phillips Head Screws (152) on Lower
Swing Arm. Repeat for the right side Connecting Arm Covers (122) and
(120) on right Connecting Arm and right Lower Swing Arm.
2. Secure two Slide Wheel Covers (99) with four M5 × 15mm Phillips Head
Screws (152) .
3. Install the four Stabilizer Covers (104 & 105) on both left and right sides
of rear tube of rear rail assembly with four M5 x 15mm Phillips Head
Screws (152) .
4. Match left and right Console Mast Covers (111, 112) with left and right
side cases respectively and secure with two 4mm × 15mm Sheet Metal
Screws (154) .
5. Match Front Handle Bar Cover (100) and Rear Handle Bar Cover (101)
with each other on left Lower Swing Arm and secure with four 3.5mm ×
12mm Sheet Metal Screws (153) . Do the same for right Front Handle Bar
Covers (102) and Rear Handle Bar Cover (103) . (Be careful not to pinch
the wire).
6. Install the two Oval End Caps (89) onto both ends of the front stabilizer
tube.