1 kW
≅
1,36 CV 1 kW
≅
1,36 HP (metric) 1 kW
≅
1,36 CH
44529
Max. Intermittent inclination in operation (º):
30
* The sea water pump flow has been obtained under zero aspiration height conditions. Besides, depending on the arrangement of the
complete system (hoses, elbows, suction heads, etc. ) this value can be lower.
** The diameter system will be calculated depending on each installation in case of a dry exhaust
Total length (mm):
489
Total width (mm):
441
Total height (mm):
573
Down Angle (RO):
15
Installation data / Dimensions
Sea water hose inner diameter (mm):
20
Fuel feeding hose inner diameter (mm):
8
Fuel return hose inner diameter (mm):
5
Exhaust hose inner diameter (mm):
50**
Thermostat valve completely opened (ºC):
90
Maximum sea water temperature (ºC):
32
Heat to be extracted at 100 % load (kcal/h):
20000,11
Engine ratio/coolant pump RPM:
0,75
Coolant pump flow at maximum RPM (l/min):
75
Sea water pump flow at maximum RPM (l/min):
33 *
Maximum suction head of sea water (m):
3
Thermostat valve starts opening (ºC):
76,5
Total circuit capacity (l):
4
Oil pressure switch (kg/cm2):
0,5
Cooling system
Coolant type:
Organic 50%, -38ºC
Volume capacity of coolant circuit (l):
5,7
Minimum pressure at idle (kg/cm2):
1
Oil type:
SAE 15W40
Maixmum oil temperature (ºC):
98
Oil pan capacity (l):
3,5
Lubrication system
Lubrication type:
Forced circulation
Oil consumption at full load (g/kWh):
N/A
Minimum pressure at maximum RPM (kg/cm2):
3
Maximum pressure at maximum RPM (kg/cm2):
4
Idle Consumption (g/kWh):
168
Consumption at 50 % (g/kWh):
250
Consumption At 75 % (g/kWh):
260
Consumption at 100 % (g/kWh):
280
Injection Pressure (bar):
140
Maximum static head of return pipe (bar):
0,26
Firing order:
1-3-2
Injection timing (º):
17 Before TDC
Fuel standards:
Fueloil diesel ASTM
Injection pump type:
In line
Maximum suction head (m):
0,3
Governor type:
Mechanical
Battery Cable Length (m):
1,5 m
Battery Cable Section (mm2):
70 mm2
Fuel system
Fuel type:
Diesel
Injection system:
Mechanical and indirect
Electrical system
Voltage (V):
12
Alternator (A):
120
Minimum Battery Capacity (Ah):
65
Engine shut off system:
ETS
Rotation (viewed from flywheel side):
Counterclockwise
Idle RPM:
900 (±50)
Intake system:
Naturally aspirated
Starting aid:
Glow plugs
Compression ratio:
22:1
Continuous power (kW):
20,8
Intermittent Power (kW):
23,1
Max RPM:
3000
Layout of cylinders:
In line
Cylinder diameter (mm):
78
Stroke (mm):
92
Total displacement (cc):
1318
MINI-33
Specifications
No. Of Strokes:
4
Number of cylinders:
3
