1 kW
≅
1,36 CV 1 kW
≅
1,36 HP (metric) 1 kW
≅
1,36 CH
44540
Max. Intermittent inclination in operation (º):
20
* The sea water pump flow has been obtained under zero aspiration height conditions. Besides, depending on the arrangement of the
complete system (hoses, elbows, suction heads, etc. ) this value can be lower.
** The diameter system will be calculated depending on each installation in case of a dry exhaust
Total length (mm):
640
Total width (mm):
517
Total height (mm):
623
Down Angle (º):
15
Installation data / Dimensions
Sea water hose inner diameter (mm):
32
Fuel feeding hose inner diameter (mm):
8
Fuel return hose inner diameter (mm):
6
Exhaust hose inner diameter (mm):
60**
Thermostat valve completely opened (ºC):
90
Maximum sea water temperature (ºC):
32
Heat to be extracted at 100 % load (kcal/h):
33989,87
Engine ratio/coolant pump RPM:
0,81
Coolant pump flow at maximum RPM (l/min):
102
Sea water pump flow at maximum RPM (l/min):
75 *
Maximum suction head of sea water (m):
4,5
Thermostat valve starts opening (ºC):
76,5
Total circuit capacity (l):
6,5
Oil pressure switch (kg/cm2):
0,5
Cooling system
Coolant type:
Organic 50%, -38ºC
Volume capacity of coolant circuit (l):
9,5
Minimum pressure at idle (kg/cm2):
1
Oil type:
SAE 15W40
Maixmum oil temperature (ºC):
79
Oil pan capacity (l):
5,5
Lubrication system
Lubrication type:
Forced circulation
Oil consumption at full load (g/kWh):
7,95
Minimum pressure at maximum RPM (kg/cm2):
2
Maximum pressure at maximum RPM (kg/cm2):
4
Idle Consumption (g/kWh):
300
Consumption at 50 % (g/kWh):
280
Consumption At 75 % (g/kWh):
263
Consumption at 100 % (g/kWh):
265
Injection Pressure (bar):
140
Maximum static head of return pipe (bar):
0,26
Firing order:
1-3-4-2
Injection timing (º):
8 Before TDC
Fuel standards:
Fueloil diesel ASTM
Injection pump type:
Rotative
Maximum suction head (m):
0,6
Governor type:
Mechanical
Battery Cable Length (m):
1,5 m
Battery Cable Section (mm2):
70 mm2
Fuel system
Fuel type:
Diesel
Injection system:
Mechanical and indirect
Electrical system
Voltage (V):
12
Alternator (A):
95
Minimum Battery Capacity (Ah):
92
Engine shut off system:
ETR
Rotation (viewed from flywheel side):
Counterclockwise
Idle RPM:
800 (±50)
Intake system:
Naturally aspirated
Starting aid:
Glow plugs
Compression ratio:
22:1
Continuous power (kW):
39,1
Intermittent Power (kW):
43,4
Max RPM:
3000
Layout of cylinders:
In line
Cylinder diameter (mm):
88
Stroke (mm):
95
Total displacement (cc):
2311
MINI-62
Specifications
No. Of Strokes:
4
Number of cylinders:
4
