8.1 Cleaning
●Control panel, shroud, etc. are all made by durable ABS plastic with baking finish on the
surface. Do not use oil or other chemical liquids to wipe the scooter. Do not use sharp brushes
to prevent surface scratches. In order to prevent the electrical components from damage, do not
wash the scooter from the tap directly. Only clean cloth can be used to directly wipe the
appearance.
●Wheels can not use oil or other organic chemical liquids when you are wiping the scooter. Do
not rinse directly with water but can wipe with a clean cloth or wipe with a soft brush.
●The seats can be wiped with clean rags on the surface or wiped with water at clean rags.
8.2 Maintenance
8.2.1 Basic maintenance for daily use:
● If you want to use it every day, check it yourself before using it. Just check whether there is
damage on appearance.
● There will be some electrical failure occasionally, but most of the situation can be solved
yourself. The main reason is that the battery is not fully charge or saturated or the performance
has fallen.
8.2.2 Basic maintenance for daily use:
8.2.2.1 Battery Electrode Connection:
● Make sure that the electrode of the battery is tightly connected to the electrode on the
vehicle body and is free from corrosion; (monthly)
● The battery must be placed in the battery compartment and the electrodes are tightly
connected (do not disassemble the battery compartment at will). (Per year)
8.2.2.2 Wire Connector:
● Check all exposed wire connections Regularly; (monthly)
● Check all exposed wire insulation regularly including charger plugs; (monthly)
● Repair or replace the damaged connector and connect the connector. (Per year)
8.2.2.3 The Key Screws or Nuts:
●Periodically check all exposed screws or nuts for loosening. (per month)
8.2.2.4 Solax Electric Wheelchair Bearings and Motors / Transmissions:
●The component has been filled with lubricating oil, closed use, no need to inject oil; (annual)
●Avoid all electrical components damp. Such as control panel, charger, electrical controller
and other components.
●If some components are damp, they must be dried before they can be used.
10. Product Warning Labels
WARNING
WARNING
Ensure the Via is powered
off before you get onto or
off it.
Ensure the Via is powered
off before you get onto or
off it.
2
4
3
1
5
6
7
8
9
Reset switch
Reset switch
Once short circuit appears,
press this button and wait 5
minutes until wheelchair
retrieves regular operation
(Please refer to user’s manual
before operation)
Sticker of forbiding to hang
Warning oftransportation
Battery sticken
Recycling cabel
Scooter could be not used in
moving vehicle
Nothing could be hanged in
adjusting rod
Picture of circuit config
uration
The pioduction of scoorer is
identified fiom the factony pare
of departure /scooter No.
Scootex No
Petails of replacing battery
please refer to the manual
note of replacing battery
The produet is prorded by
environmental manufactarer
part of the product maybe
contain harmful substances
to the enviroment It is prohibited
by law lto direetly dispose of it
in landfills piease scparate and
recycle it
Please refer to the manual for
details of battery replacement.
24V/4.95AH
PHT
DEHP
68P
D6P
S7102
TPY B
