1
Note on this Manual
1.1
Scope of Validity
This manual is an integral part of T-BAT Series. It describes the assembly,
installation, commissioning, maintenance and failure of the product. Please read
it carefully before operating.
T-BAT Module-HV
T-BAT BMS
1.2
Target Group
This manual is for qualified electricians. The tasks described in this manual may
only be performed by qualified electricians.
1.3
Symbols Used
The following types of safety instructions and general information appear in this
document described as below:
Danger!
“Danger” indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
Warning!
“Warning” indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Caution!
“Caution” indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Note!
“Note” provides tips that are valuable for the optimal operation of
your product.
4.5
CABLE CONNECTION.......................................................................................19
4.5.1 CONNECTING POWER CABLES....................................................................19
4.5.2 CONNECTING RS485 COMMUNICATION CABLE.................................23
4.5.3 CONNECTING CAN COMMUNICATION CABLE....................................24
4.5.4 CONNECTING GROUND WIRE.....................................................................25
4.5.5 CONNECTING CHARGING CABLE...............................................................25
4.6
OVERVIEW OF INSTALLATION.......................................................................26
5
COMMISSIONING.................................................................................27
5.1
CONFIGURING BAT TERY SYSTEM...............................................................27
5.2
COMMISSIONING..............................................................................................29
5.3
STATUS INDICATORS........................................................................................30
5.3.1 BMS (MC0500)....................................................................................................30
5.3.2 BAT TERY MODULE (HV10045/HV10063)................................................31
5.3
SHUT TING DOWN T-BAT SYSTEM...............................................................31
6
TROUBLESHOOTING............................................................................32
6.1
TROUBLE SHOOTING.......................................................................................32
7
DECOMMISSIONING............................................................................34
7.1
DISMANTLING THE BAT TERY.........................................................................34
7.2
PACKAGING..........................................................................................................34
HV10045 (T45)
HV10063(T63)
MC0500 (Master Box)
Note: There are 8 models for T-BAT system, which includes BMS and battery
module(s). Please refer to section 3.3.1
T-BAT SYS-HV Configuration List
on page
11 for detailed models.
