solasfires.com
5
LOG SET INSTALLATION
STEP 5
Install the center birch log by placing the left side of the
log on the locating pin left of the pilot. The right side of
the log will rest on top of the 3-rock cluster, rotate the
log so it gently touches the rear enamel panel of the
firebox. (Figure 12)
STEP 6
Evenly distribute the included 7oz of lava rock on the
exposed burner top. Cover the burner top completely
but do not compress or “pack” the lava rock tightly.
Pay special attention to tight and hard to reach areas
when placing the media on the burner. It is ok if small
amounts of lava rock are lost over the edge of the
burner. (Figure 13)
Figure 12
Figure 13
Installation of the Birch Log Set is now complete, refer to the ONE6 Installation and
Operation Manual for instructions on final assembly and lighting of the appliance.
