Date: July 2009
Proven quality – simply clever
Congratulations and thank you for choosing the high-quality Suntub® Assembly System from
SolarWorld AG.
The Suntub® Assembly System is weighted with ballast (gravel, blocks, etc.) in order to resist
wind loads. The required ballast load can be customized – based on tested dimension tables –
to fit the situation and provide an optimized, safe installation.
Only the highest quality components are used in order to ensure trouble-free operation of your
PV system.
The directions contained here are intended to assist you in properly installing your Suntub®
Assembly System.
Since individual circumstances may vary, you are advised to seek expert assistance in adapting
these recommendations to your particular roof situation.
The information provided in these installation instructions is based on the relevant standards
and regulations valid in Germany. If you are installing the Suntub® Assembly system outside of
Germany, please be sure you know and understand the relevant standards and regulations for
your area.
