....
Solartech
P
PP
Power
ower
ower
ower,,,, IIIInc
nc
nc
nc....
Solartech Power, Inc.
1070 N. Kraemer Place
Anaheim, CA 92806 USA
Tel: 714-630-8880 Fax: 714-630-8887
www.solartechpower.com
E-mail: [email protected]
Step 1 - mounting the arm to the PV module
Step 2 - attaching the bracket to the pole
Adjust the backing bracket to desire
height and then attached the U-clamp on
the pole as shown in picture.
Insert a bolt, washer and PV module clamp
through one of the slots.
Place a washer, lock washer and hex nut on
the end of the bolt, and tighten loosely
Lay the PV Module face-down on a
protected flat surface.
Center the arm on the back of the panel as
shown and position the clamps under the
edges of the module’s flange.
Make sure that the clamp bolts are resting
against
the
module’s
flange
before
tightening
