Factory settings and motion detection functions: Pole:
The factory setting of the SPSF series switch is light-controlled (at a threshold of 30 Lux). The Recommend use the upper diameter of pole: 2.3-2.9 in (see figure 1)
lamp automatically lights up when it is dark and turns off when there is light or at dawn. At night,
when no one is around, it operates under power saving mode. When anyone approaches, its
brightness increases by a factor of four. If the air temperature is close to human temperature, the
motion detection may reduce in sensitivity.
1. Environment:
a. Please s
elect the appropriate product according to the installation site’s sunlight intensity and
required operating time. If you are in the northern hemisphere, face the solar panels towards
the south as far as possible when installing the SPSF series; if you are in the southern
hemisphere, face the solar panels towards the north.
b.
For maximum operation efficiency of the solar panels, make sure the sunlight is not blocked by
buildings or trees.
2. Altitude and distance parameters:
Install according to the height and distance (between the lamps) restrictions as set by each
respective product type. Consult our product specialists for special lighting requirements.
How to turn on our solar street lights ?
Notice: Please do not need Press ON button of the small blue remote to turn on the lamp,
because our solar lamps have Automatic Activation Function.
Remove the SPSF light from package box, let the solar panel absorb energy from sun, connect
the waterproof cable between solar panel and lamp, then the lighting system can be activated,
the SPSF light will be lighting automatically at night.
If you want to check whether the SPSF light are lighting during the daytime:
Cover the solar panels with shelters, the lamp will be lighting.
Figure 2
Press Demo Button after the lighting system has been activated, the lamp will be lighting
for a few mins then turn off automatically.
Содержание SPSF Series
Страница 7: ...Process...
