SOLARJACK PCA 8-60B, Руководство пользователя

Страница: 2 / 13

7/19/1999 2
PCA 8-60B
The SOLARJACK PCA 8-60B PUMP CONTROLLERS are high quality, solid state, DC power
converters designed as the interface between a SOLARJACK SDS series pump and the
DC power source. This power source may be solar panels or batteries. The purpose
of the controller is to maximize the total daily water output while providing
protection for the pump as well as the power source.
The unique features incorporated in each controller will protect your pumping
system allowing it to provide you with many years of dependable, trouble free
service. When used in a solar panel direct system it provides protection for the
pump from over-voltage and over-current conditions or will provide current
boosting in low sunlight conditions.
This manual will show you how to make the connections for your particular system
configuration.
Additional options are also explained and the wiring diagrams are given.
PCA 8-60B SPECIFICATIONS
Input Voltage 24-80V (Open Circuit)
(Four
Panels in Series Max)
Maximum Output Current 8 AMPS
Maximum Surge Current 12 AMPS
Maximum Output Power
480 Watts (60V @ 8A)
FEATURES
1.) Current Boosting for matching the load requirements of the pump.
2.) Voltage Regulation of the PV array at its maximum power point.
3.) Built in controller protection:
A. Over-current circuit breaker
B. Reverse polarity (10 Amp Max)
C. Surge suppression
4.) Weather tight cast aluminum enclosure with hinged door.
5.) On/off switch.
6.) Output current limiting.
7.) Remote float switch circuit.
8.) Low water cut-off circuit with adjustable set points.
9.) High water cut-off circuit with adjustable set points.
10.) Power in and power out indicator.
11.) Pre-adjusted panel voltage settings from a DIP switch.
12.) Output voltage adjustment control. (OPTIONAL)