Solaris SoLED W840, Руководство пользователя

Страница: 6 / 20

SoLED W840 User Manual Version 4.1 051915 PRELIMILARY
6
3-P
IN TO
5-P
IN
C
ONVERSION
C
HART
If using a console with a 3-pin DMX output connector, a 3-pin to 5-pin adapter is needed. The chart below details
a proper cable conversion:
3-PIN TO 5-PIN CONVERSION CHART
Conductor 3 Pin Female (output) 5 Pin Male (Input)
Ground / Shield Pin 1 Pin 1
Data (
-
) signal
Pin 2 Pin 2
Data ( + ) signal Pin 3 Pin 3
Do not use Do not use
Do not use Do not use
S
ETTING UP A
DMX S
ERIAL
D
ATA
L
INK
1. Connect the (male) 5-pin connector side of the DMX cable to the output (female) 5-pin connector of the DMX
console.
2. Connect the opposite end of the cable (female) to the input connector of the fixture consisting of a (male) 5-pin
connector.
3. Proceed to connect from the fixture output as stated above to the input of the following fixture and so on.
4. Continue linking until the last fixture is connected in your DMX chain.