Solaris SoLED W840, Руководство пользователя

Страница: 3 / 20

SoLED W840 User Manual Version 4.1 051915 PRELIMILARY
3
1. I
NTRODUCTION
P
RODUCT
O
VERVIEW
The Solaris LED SoLED W840 white LED strobe offers the same look and feel as xenon strobes at a fraction of
the power consumption. Using high-intensity Cree
®
LEDs, the SoLED provides ultra-bright whites with 92,000
lumen peak output. Compact and lightweight, the SoLED is very portable and hides well in any application.
 Ultra-bright – 840 Watts of brilliant white output, 92,000lm peak output
 Compact and lightweight – Fits almost anywhere
 Easy to use – Same control modes and personalities as other popular strobes
 DMX512 with RDM – Easy to control plus continual operational feedback
 LED design – Longer life than xenon lamps for reliability and long-term cost savings
 Built-in yoke – Application and mounting flexibility
 Fan-free – Quiet operation, perfect for theatre, film, and TV use
W
HAT IS INCLUDED
 1x Solaris LED W840 fixture
 1x Power cable
 1x User Manual
U
NPACKING
I
NSTRUCTIONS
Upon receipt of the fixture, carefully unpack the carton and check the contents to ensure that all parts are
present and in good condition. Notify the shipper immediately and retain packing material for inspection if any
parts appear to be damaged from shipping or if the carton itself shows signs of mishandling. Save the carton
and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture
be returned in the original factory box and packing.
P
OWER
R
EQUIREMENTS
Before powering the unit, make sure the line voltage is within the range of accepted voltages. This fixture
accommodates 100-240VAC, 50/60Hz. All fixtures must be powered directly from a switched circuit and cannot
be operated with a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used
solely as a 0-100% switch.
When powered up, SoLED performs a preprogrammed internal test. On initial power-up the factory default DMX
address appears on the display screen and SoLED is ready for operation. After initial power-up, the last-saved
DMX address will appear.
F
REQUENCY
S
ETTING
Depending on location, change the Default Frequency setting to match the mains power (e.g., US and Canada
should be set at 60Hz). Proper frequency setting will ensure minimum amount of visible artifacts when using
Solaris LED on camera.