Solaris Mozart user manual version 2.0 122216
- 3 -
1. Introduction
P
RODUCT
O
VERVIEW
The Solaris Mozart is an extremely versatile and creative pixel-mapping and decorative lighting tool that can
be placed almost anywhere. Blazing fast (38,400Hz), with Cree
™
LEDs, Mozarts are ideal for high-speed
photography and video. Modes include 1, 4, or 16 pixels (3 to 48 DMX channels) per fixture.
The 10-way power supply in a rugged ProPlex Mini enclosure is designed for portable use or truss-mounting
with yoke included. Coming soon is the 40-way 2U RackMount power supply which supports DMX, RDM,
ArtNet, and sACN protocols. It features a large front-panel touchscreen, and a dedicated PC configuration
utility.
•
Great for low weight load-bearing structures and surfaces.
•
Approx. 11,000 NITS! Brighter than nearly all outdoor LED walls!
•
Rain and dust resistant IP65 enclosure – use in all environments!
•
Ultra-high refresh rate – 38,400Hz! Great for high-speed photography and videography.
•
Single cable, simple power-data connections, daisy-chain or split – location flexibility.
•
Extremely compact and lightweight – 4.7 x 43.7 inches. Only 1 ¼ lb.
•
Easy remote addressing and mode switching via RDM
U
NPACKING
I
NSTRUCTIONS
Upon receipt of the fixture, carefully unpack the carton and check the contents to ensure that all parts are
present and in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear to be damaged from shipping or if the carton itself shows signs of mishandling. Save the
carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that
the fixture be returned in the original factory box and packing.
P
OWER
R
EQUIREMENTS
Before powering the unit, make sure the line voltage is within the range of accepted voltages. This fixture
accommodates 100-240VAC, 50/60Hz. All fixtures must be powered directly from a switched circuit and
cannot be operated with a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0-100% switch.
When powered up, Solaris performs a preprogrammed internal test. On initial power-up the factory default
DMX address appears on the display screen and Solaris is ready for operation. After initial power-up, the
last-saved DMX address will appear.
S
AFETY
I
NSTRUCTIONS
•
Please keep this User Guide for future reference. If unit is sold to another user, make sure they also
receive this instruction booklet.
Please read these instructions carefully. This user guide
contains important information about the installation, usage
and maintenance of this product.
